Aqua Andy

Serving Hunters Hill and Gladesville

Pool servicing across Hunters Hill and Gladesville

Andy in a respirator standing in a drained pool, set up for an acid wash

Acid washing, equipment installation and pressure testing across Hunters Hill, Woolwich, Henley and Gladesville. Older surfaces and salt-exposed plant are the two recurring jobs.

Acid washing is the job this group generates most, with equipment replacement close behind. The area runs from Gladesville along the Victoria Road spine out to the peninsula between the Lane Cove and Parramatta Rivers, taking in Hunters Hill, Woolwich and Henley. Hunters Hill Council covers Hunters Hill and Woolwich. Gladesville and Henley sit near a council boundary, so it is worth checking which one you are actually in before lodging anything with a council.

Older pools are common here, and a lot of the concrete, pebblecrete and marbelite surfaces around the heritage streets have been in the ground long enough that no amount of brushing will bring the finish back. That is an acid wash conversation, not a chemistry one. Separately, the closer a property is to open water, the harder salt air is on the equipment. Heater casings, pump housings, salt cells and handrails all wear faster on the exposed streets than they do a few hundred metres inland.

That is a tendency, not a rule. Plenty of pools in this area are recent fibreglass installs with equipment barely out of warranty, and much of Gladesville sits far enough back from the water that salt exposure is a non-issue. Andy works out which case you are before recommending anything.

★★★★★

Andy did an amazing job refurbishing our pool - he was honest and did the work at an amazing price. Highly recommend Aqua Andy
Isami & Marisa Morris

Common questions across Hunters Hill and Gladesville

Can an old concrete or pebblecrete pool be brought back without resurfacing?
In most cases yes. An acid wash strips the stained top layer off the existing surface and takes the finish back close to new, and it costs a fraction of a full resurface. Whether it is the right call depends on the condition of the surface underneath, which Andy checks before quoting rather than after.
Does salt air really shorten the life of pool equipment?
On the properties closest to open water it makes a noticeable difference, particularly to heater casings, pump housings, salt cells and any exposed metal fittings. A few streets back from the water it matters far less. Where a plant deck is exposed, siting the equipment out of the direct salt spray and rinsing it down occasionally buys real extra years.
Can Andy work on a pool in a heritage conservation area?
Servicing, repairs, equipment replacement and acid washing are all normal maintenance and are not restricted. Anything structural or anything that changes what is visible from the street can be a different matter in a conservation area, so check with Hunters Hill Council before committing to that kind of work.
Do I need a compliance certificate for my pool?
Every swimming pool in NSW must be listed on the NSW Swimming Pools Register, and a valid Certificate of Compliance is required before a property with a pool is sold or leased. Aqua Andy is licensed for pool repairs and servicing under NSW Fair Trading 456556C and does not carry out pool safety inspections or issue certificates, so that part goes through your council or a registered private certifier.

Get in touch

Get a free quote

Tell Andy about your pool and he'll get back to you within one business day. Or call direct on 0468 650 172.

Andy replies within one business day